#: 12908 S7/Telecommunications
    05-Nov-91  20:24:07
Sb: #12902-Help w/ Sterm
Fm: Erich Schulman 75140,3175
To: BRUCE BAKER 73747,3137

Even when I used an old version I had trouble at first, and I had no docs at
all.  I thought you would press ctrl, break, and the letter all at the same
time.  Seeing the program's reaction to my attempst (which usually failed) led
me to believe that you may have to press the ctrl-break and the letter in
sequence, so I tried it and it worked.  If you download RSDos and RSSave your
transfers between Disk BASIC and OS-9 will be much easier.  You'll also need a
IPatch for CC3Disk which you can also download. And you'll have to download the
IPatch utility if you don't have it already. Hang on to the IPatch utility
because there are a variety of useful IPatches available for downloading.   I
believe all this put together is about 60K of .ar files.  Have you ever
installed the IRQ Hack or its software equivalent?  With STerm, you'll probably
need it if you want to use a baud rate over 300.