#: 3364 S7/Telecommunications
    08-May-90  20:37:31
Sb: #3347-#Modem problems
Fm: LUTE MULLENIX 70721,2230
To: Bill Dickhaus 70325,523 (X)

Bill:

With the Modemphone when you engage the modem the dialer is disabled.

It seems to be a quirk is this hardware setup. When I was running under DECB
through the bitbanger it never gave me any trouble.

I'm useing ACIAPAK with the patch that comes on the Disto disk with the
discriptors. I've also made the hardware hack with the diode that was in The
Rainbow. I'm useing a Super Controller I with a 3 in 1 board, so that is my
RS232 port.

The Modemphone has the cable built in, you just plug it into the port.

I do hope to be moving up to a 2400 baud auto answer/dial unit in the not too
distant future, but until then...

I dug out an old Modem I, and have logged on twice with no problem now.

     >Lute<

There is 1 Reply.