#: 20120 S1/General Interest
    09-Jul-94  06:31:22
Sb: #MM/1 hard drive boot
Fm: keith bauer 71102,317
To: all

First off let me state that this "problem" is not a big deal. It is just one of
those things that should work but doesn't. I have a MM/1 with a Maxtor 7213SR
hard drive. I formally had a Seagate ST157N. When I had the Seagate I was able
to boot from the hard drive without any problem. Now that I have the Maxtor it
must tries anywhere from 5 to 10 times to boot before it does. This is when it
is up and running and I just press reset. It is worst when it is a cold boot. I
have a blank formatted disk in the drive like I should. It seems to me that I
saw a message a while ago from someone who had this same make of drive that
found a fix to the problem. If so please let me know what you did.

Thanks

 Keith Bauer

 CIS:71102,317    Delphi:keithbauer   Internet:keithbauer@delphi.com

 Via InfoXpress/OSK ver 1.01                     How 'bout them Cowboys!


There is 1 Reply.