Hello Bill!

Saturday July 20 1996 13:54, John Piper wrote to Bill Grimsley:

 BG>> It was another USR calling (Rockwells don't support 64S trellis).

Well, at least we're getting some decent statistics at last. Here's a connect
to Paul Sanders' V.E;


AT%Q1
EQM                  = 20
RX level             = -27dBm
TX level             = -10dBm
Far echo delay       = 2ms
Far echo level       = -50dBm
Pre-emphasis filter  = 4
Pre-Coding           = TX 1 RX 1
Shaping              = TX 0 RX 1
Non-linear encoding  = TX 1 RX 1
Trellis mapping      = 64-4D
SNR                  = 47dB
Normalized band width= 150Hz-3675Hz
Symbol rate          = 3200
TX carrier           = low
RX carrier           = low

at%q2

Transmitted bytes    = 386
Received bytes       = 16389

Transmitted I frames = 347
Received I frames    = 2345
SREJs received       = 0
REJs received        = 0
SREJs transmitted    = 0
REJs transmitted     = 0

SREJ                 = enabled
Transmit window size = 15
Receive window size  = 15
Transmit frame size  = 128
Receive frame size   = 128

BTLZ dictionary size = 2048
BTLZ string length   = 32
Transmit compression = enabled
Receive compression  = enabled


The bandwidth and echo aren't too good, I got up to 3825Hz and 1ms to my
university, which is in the city (20km) while Paul is out this side of
town, quite a bit closer. Unfortunately those stats don't seem to include
the connect speed, which was 31200 RX / 26400 TX. Haven't had 33.6 yet.


Regards,
Hamish

--- GoldED/P32 2.42.G1219+