| TIP: Click on subject to list as thread! | ANSI |
| echo: | |
|---|---|
| to: | |
| from: | |
| date: | |
| subject: | Re: ATM Re: Re: Boundary Condition? |
From: "Richard F.L.R. Snashall"
To: atmlist
Reply-To: "Richard F.L.R. Snashall"
Bob May wrote:
> The Strehl ratio is determined in the monochromatic world. Thus, a singlet,
> even at a very short focal ratio, can produce a very good number despite
> poor color correction. You need to calculate the Strehl ratio for the
> unfocused part of the image also and that will indeed kick the number down.
> Bob May
The Strehl ratio I was quoting was the Polychromatic Strehl Ratio given in
OSLO (ZEMAX gives somewhat higher values). As an experiment, I changed the
weight of the 650 nm wavelength to 1.0 (up from about 0.1) and recalculated
this Strehl Ratio; it dropped to .758 in the field center. I assume from
this that the Strehl Ratio calculated by OSLO weights all the wavelengths,
even though it only lists wavelengths 1, 2 and 3 in the window. In this
case, I used eleven wavelengths from 450 nm to 670 nm. I believe that this
would give a good measure of Photopic Strehl Ratio, provided that OSLO does
not recalculate a new image centroid for each wavelength.
Rick S.
--- BBBS/NT v4.00 MP
* Origin: Email Gate (1:379/1.100)SEEN-BY: 633/267 270 @PATH: 379/1 633/267 |
|
| SOURCE: echomail via fidonet.ozzmosis.com | |
Email questions or comments to sysop@ipingthereforeiam.com
All parts of this website painstakingly hand-crafted in the U.S.A.!
IPTIA BBS/MUD/Terminal/Game Server List, © 2025 IPTIA Consulting™.