Hamish, at 15:00 on Jul 23 1996, you wrote to Bill Grimsley...

HM> Well, at least we're getting some decent statistics at last. Here's a 
HM> connect to Paul Sanders' V.E;

HM> RX level             = -27dBm
HM> TX level             = -10dBm
[ ... ]
HM> SNR                  = 47dB

So how did you manage a S/N ratio of 47db then?  If that's normal for you,
how much do you want for your house?  :)

HM> Symbol rate          = 3200

HM> The bandwidth and echo aren't too good, I got up to 3825Hz and 1ms to my 
HM> university, which is in the city (20km) while Paul is out this side of 
HM> town, quite a bit closer.

Dunno, I'd be very interested to see how a Courier performs from your site.
 With those levels and bandwidth, you should be seeing a 3429 symbol rate.

HM> Unfortunately those stats don't seem to include the connect speed, which 
HM> was 31200 RX / 26400 TX. Haven't had 33.6 yet.

And with 3200 symbol rate, you won't see 33k6 anyway, as that requires the
3429 symbol rate.  3:640/305 is a good test, as Dave can just about spit on
his exchange from his back door, and even with my poor lines, I'm getting
33k6 connects with his Courier (usually 33600/31200).

Regards, Bill
@EOT:

--- MsgedSQ/2 3.50