06-10-15 06:47 TOM WALKER wrote to ED VANCE about Re: SCSI Adapter Startup

 TW> {at}MSGID: 
 EV> EV>I can't remember if there is another empty slot besides the one I put
 EV> EV>the SCSI board in.
 EV> EV>Thanks, I will see what a USB3 card sells for.
 EV> EV>I only use the External HDD for backing up so it might not be
 EV> EV>cost-effective for me to get a card.
 EV> EV>I'll check though. Thanks.

 EV> TW> I have seen PCIe USB-3 cards for as low as $16.00

 EV>16 bucks sounds cheap enough though I feel like I will wait a while on
 EV>getting a PCIe USB3  card just for a backup drive.

 TW> Here is the card I picked up:

 TW> http://www.newegg.com/Product/Product.aspx?Item=17Z-0002-00002

 TW> Since I wanted a USB-3 connector on the front of the Computer I
 TW> alos picked this one becasue in addition to the two back panel
 TW> USB-3 conectors it also has an internal 19 pin USB connector
 TW> for hooking up a USB-3 Card Reader which I have in the Floppy
 TW> Drive opening on the computer case.

 TW> Here is the Card Reader I am using:

 TW> http://www.newegg.com/Product/Product.aspx?Item=N82E16820223119
Howdy! Tom,

HP put a card reader in my XP pc but it will only read up to 2GB.

I use a SDHC to USB2 adapter to read any SDHC cards by inserting it
into a USB2 slot on the pc.

After I bought the XP pc HP sent one BIOS update but the ability to
read SDHC cards wasn't in that update.

Figureing out Work Arounds is part of the computer game, isn't it?

73

... I started out with nothing & have most of it left.
--- MultiMail/MS-DOS v0.49
--- SBBSecho 2.12-Linux