Hi Poe,

 IS> Unless of course USR changed the modem to keep the stats after ATZ,
 IS> which was also being asked of them at one stage?

 PL> Not that I know of; might be Bink. I have to admit I
 PL> haven't changed my setup in any drastic way for several
 PL> years now...

On seeing Bill's message, and after replying, I thought I'd best check it out.
In the DOS version of 2.60 at least, there's been no change to that
behaviour; here's a dump of my buffers after a call, first the transmit
buffer (7 bit):

EEDA #G "EEDA #G "EEDA #G "EEDA #G "EEDA #G "EEDA
#G "EEDA #G "EEDA #G "EEDA 
ATZ0
AT&E1*E0M0
ATKS69?
ATZ0
AT&B1

That's Janus disconnect handshake packets, followed by PreInit (ATZ0, after
a DTR toggle) then Init (AT&E1*E0M0) to hangup, followed by AfterCall
(ATKS69?), then PreInit followed by Busy (exiting to process received
mail).

Here's the corresponding receive buffer stream (extra line spacing removed):

 #G "EEDA #G "EEDA #G "EEDA #G "EEDA #G "EEDA

NO CARRIER  <-- DTR drop on PreInit
OK          <-- ATZ0
OK          <-- AT&E1*E0M0
000:36      <-- ATK (time online since carrier detect)
007         <-- S69? (line quality, out of 7)
OK          <-- following the above.
OK          <-- ATZ0
OK          <-- AT&B1 (makebusy / offhook)
MAKEBUSY    <-- response to same.

Cheers, Ian

--- MaltEd 1.0.b5