On 25-Jul-96 Albert Alcoceba scribble to All and I cut in with=-->

>AA=->UART Framing Error.
>AA=->Data Sub-packet too long
>AA=->Data CRC Error at 0.

Stuffed if I know

>AA=->On a related topic,

The bgfax echo area may help you fix this ?

As for your modem settings the S0=2 ? your software should pick up the phone
not the modem

>AA=->Terminal      : 38400  8 data bits  No Parity

Can you not lock the port at 115200 or 57600 as 38400 is a bit slow for a 33k
modem to computer

>AA=->In FrontDoor I'm using the following init strings to
>AA=->enable fax reception and set adaptive answering:
 
>AA=->Init-1      ATZ|
>AA=->Init-2      AT+FCR=1;+FDCC=0,5,0,2,1,0,0,0|
                                         ^ make this 0 for now
>AA=->Init-3      AT+FLID="61 2 9545 4371"|
 
>AA=->Force Answer    AT+FCLASS=2;+FAA=1;A|
                        ^^^^^^^^^^ remove this
>AA=->(Answer string)
 
 
>AA=->Does anyone have any ideas why setting the Fax parameters
>AA=->is affecting data transfers?
 
You are telling the modem to be a fax and answer
Bob

- Pedit Ver 2.5
---