G'day John!

 -=> In a message on 01 Apr 96 <=-
 -=> John Piper said this to Stephen Lennie <=-

 SL> This is how a CONNECT message looks with "S95=47" (also
"W2 \V1 %U2")...

 JP> Are you saying that (S95=47) == (W2 + \V1 + %U2) here?
 
No, I'm saying that I had "W2 \V1 %U2" in addition to
"S95=47".  This can
make a difference as the "/LAP-M/V.42bis/V.FC" will not appear if you only
have "\V0 %U0" (defaults) set - instead you'll only get "/REL".

Also, if you have "W0" or "W1" set and
"S95=46" the CONNECT message will
show the DTE speed not the DCE speed.

 SL> CARRIER 28800
 
 SL> PROTOCOL: LAP-M
 
 SL> COMPRESSION: V.42BIS
 
 SL> CONNECT 28800/LAP-M/V.42bis/V.FC

 JP> I don't think it's possible to achieve the /V.FC result code with the
 JP> M11F I have here.

There's been a bit of a shake-up here so I don't know if you got my other
message about this.  

 JP> From what I've heard, there are two varieties of
 JP> M11F: one is NOT a generic Rockwell, while the other is. I don't know

I don't know where you heard this story!!  Apart from bugs ;-) all the M11Fs
were the same - Series 5, Rockwell datapump, 1 MegaBit Flash ROM for NetComm
SmartModem firmware and a top DTE speed of 115200 bps.

 JP> which of the two I have here, but whatever the case, I don't think I
 JP> can achieve a V.FC result code. 

I spoke to NetComm and they confirmed what I had
suspected; that the "/V.FC" suffix is only appended on V.34 models and even
though it is included in the "V7" SmartModem code it isn't used
by the M11F.

 JP> Since one of the people I work for designed most of the M11F's code, I
 JP> think I will ask him whether or not the modem I have is capable 
 JP> of the V.FC result code. When I find out, I'll let you know.

It's not!  That's the "official" work from Osman at NetComm.  BTW *who* is
this person you work for who designed the M11F code?


BFN
  _
 (_`
 ._)teve



___ E-mail: slennie{at}cin.gov.au
~~~ PGPWave v1.22a Gamma / PGP 2.6.3i
... Been there, done that, and someone stole the T-shirt!  Hated it.
___ Blue Wave/386 v2.30

--- Maximus/2 3.01