CR> the assignment of the ARROW Keys, particularly the 101 Grey Keys.  If
 CR> the UP/DOWN/LEFT/RIGHT fields are BLANK then you have found your
 CR> problem. Look in the APPENDIX (of the Qmodem Pro Manual) and you will
 CR> find the proper assignments for VT100 Emulation as follows:
 CR> Cursor Up       ^[[A
 CR> Cursor Down     ^[[B
 CR> Cursor Left     ^[[D
 CR> Cursor Right    ^[[C
 CR> Entering these values should solve your problem....
Thanks for the response, Charles.  I checked the key assignments, and
they were as you have listed.  Then I logged on & for the heck of it,
tried using the control key in combination with the arrow keys - it
worked, i.e. the system seems to be responding to e.g. ^[OC for cursor
right.  Now I can map the keys to respond without the 
combination, but wonder why I would have to.  BTW, Cyberspace is my
provider.
Anyway, I am up and running with Qmodem now.
Regards,  Percy
___ Blue Wave/QWK v2.20
--- QScan/PCB v1.17b / 01-0105
---------------