From: "Jim Bobier" 
Subject: Printing is Slow
Date: 1997/11/15
Message-ID: #1/1
Organization: Odyssey Networks, Inc., London, Ontario, CANADA
Newsgroups: fido.novell


I am running a lab of 20 workstations at an elementary school. We have just
upgraded to 4.11 from 3.12.  Twelve of the workstations are still using
Bindery/netx since there isn't enough memory to run Client 32, the other 8
are using the Client 32 (windows 3.11).  All are connected by  coaxial
cable.  The 12 machines using netx are printing from a remote printer
attached to a workstation.  Everything is fine when printing from these
machines.  The problem is with the Client32 machines,  I can not get them
to print properly on a remote printer connected to a Client32 workstation. 
A Panasonic 1624 dot matrix is attached to a workstation andall the
workstations and configured in Windows to pritn from this workstation. 
Print jobs will either print really slowly or print out a bunch of garbage.
 I use the capture command. No network support is being used in Windows.  I
was able to get a HPLaserJet6P to work but this is for staff to use and I
need to use the dot matrix for the students work.

Any suggestions would be appreciated

Jim Bobier