TIP: Click on subject to list as thread! ANSI
echo: apple
to: comp.sys.apple2
from: Michael J. Mahon
date: 2008-10-14 13:34:34
subject: Re: 1084S-D2 Monitor

Drew wrote:
> On Oct 14, 7:36 pm, schmidtd  wrote:
>> On Oct 14, 1:00 pm, Drew  wrote:>
[...] I now suspect that the red has gone on the
>>> monitor..but before i give up, I thought i would just ask if anyone
>>> has any suggestions if it could be something else?
>> Can you give it any other color feed to verify if red is truly gone?
>> My 1084 (not an "S") has composite-in, or maybe it was
chroma+luma.
>> but there were lots of different kinds of 1084's; yours might not have
>> one.
>>
>> I've experimented with wiring my Samsung flat panel monitor's SCART
>> input to the IIgs' RGB.  I also found one color lacking - I think it
>> was green.  I bring it up because it seems like my GS put out a less-
>> strong signal on green.  I could re-wire the three colors and get
>> great results for any two out of three colors on my monitor.  Just
>> never all three at once.
> 
> Hi,
> 
> Well i connected the GS via the composite in and it only came up in
> BW, so connected my xbox 360 and to be honest at first glance it look
> ok, but then again it seemed a distinct lack of red in any of the
> images (was using it as Media Centre extender), so watched so TV and
> didnt notice any red and all looked slightly drab. Shame as the
> monitor was it great condition. My mate has an Amiga so was going to
> take it over there and see what it looks like.

As long as the color CRT red gun is still working, it shouldn't be
hard to fix.

You just need to find out where the interruption in the red signal
path occurs.  It might be as simple as a broken connection but no
worse than a dead transistor.  It certainly won't be an expensive
fix--as long as the CRT red gun is working.

There are "background level" controls for each gun--like separate
'brightness' controls.  That control may need adjusting, or it may
be intermittent or open.  In any case twisting it a bit may do the
job.

Use an insulated screwdriver to adjust the pot(s) and don't bang
on the neck of the CRT.  Stay away from the high voltage connection
on the bell of the CRT.

-michael

AppleCrate II: An Apple II "blade server"!
Home page:  http://members.aol.com/MJMahon/

"The wastebasket is our most important design
tool--and it's seriously underused."
** Posted from http://www.teranews.com **
--- SBBSecho 2.12-Win32
* Origin: Derby City Gateway (1:2320/0)
SEEN-BY: 10/1 3 34/999 106/1 120/228 123/500 140/1 222/2 226/0 236/150 249/303
SEEN-BY: 250/306 261/20 38 100 1404 1406 1410 1418 266/1413 280/1027 320/119
SEEN-BY: 393/11 396/45 633/260 267 712/848 800/432 801/161 189 2222/700
SEEN-BY: 2320/100 105 200 2905/0
@PATH: 2320/0 100 261/38 633/260 267

SOURCE: echomail via fidonet.ozzmosis.com

Email questions or comments to sysop@ipingthereforeiam.com
All parts of this website painstakingly hand-crafted in the U.S.A.!
IPTIA BBS/MUD/Terminal/Game Server List, © 2025 IPTIA Consulting™.