-=> Quoting Sean Finn to All <=-
 SF> Greetings:
 SF> I am having a great deal of trouble running Qmpro 1.53 (DOS)
 SF> under Windows 95.  I get as far as Qmpro loading, getting to the
 SF> terminal screen, and then when it tries to initialize the modem it
 SF> craps out.  Normally under DOS I would see:
 SF> +-----------------------------------------------------------
 SF> -----------------+
 SF> |QmodemPro 1.53 Compiled 09/12/94                           
 SF> |
 SF> |Copyright (C) 1992,94 Mustang Software, Inc.               
 SF> |
 SF> |                                                           
 SF> |
 SF> |You are now in TERMINAL mode                               
 SF> |
 SF> +-----------------------------------------------------------
 SF> -----------------+
 SF> |ATZ            <== Initialize with settings in modems 
 SF> nvram.                 |
 SF> |OK                                                         
 SF> |
 SF> +-----------------------------------------------------------
 SF> -----------------+
 SF> Now, ATZ doesn't even echo onto the screen and the system
 SF> freezes. I have tried this in every mode.  (E.G.  "Do not recognize
 SF> Windows", Suggest Windows when necessary", "DOS mode", etc.).  I have
 SF> successfully run it in DOS mode but then I am unable to multitask,
 SF> etc..  I would very much like to run it from within Windows as a
 SF> background process (download in the background, etc.).  A brief
 SF> description of my system configuration follows: Also, I am alerted of
 SF> the problem when the session is suspended and Windows tells me there is
 SF> a conflict of Interrupt 4. 
 SF> IBM Microchannel PS/2 486-50
 SF> COM1=03F8 & IRQ 4
 SF> 16550 UART
 SF> USR HST 14.4 Courier v.42 external
 SF> Qmpro 1.53 for DOS
   My first suggestion would be to try Windows Hyperterminal.  If that does 
not
   work then I would move your modem to com 2. IRQ 3 and set up Qmpro for 
om2
   Irq 3. Because your problem sounds like a IRQ conflict.  I have used Qmpro 
153
   under windows 95 with no problems.  Except I could not download in the 
background
   toooooooo many CRC errors.  But it would work great when it was in the 
Front.
   Since you have a PS/2 I would assume that your mouse IRQ is redirected to
   IRQ 9 or 12 I cant remember which one.  So your mouse should not be a 
problem.
   Good Luck
   Ken
... "Bother" said Pooh as "Formatting Drive C" appeared on the screen
___ Blue Wave/386 v2.21 [NR]
--- Maximus/2 2.02
---------------