Thats a symptom of the card being accessed at 'fast' speed and it's
not compatible. The Mockingboard will do the same thing. When the
software goes for the card, it locks.


I'm gonna figure it's already set to  "Your Card" since the machine
locks with a CP/M disk in the drive. Otherwise it would skip it. If
there's an accelerator in there, it needs to do that slot 'Slow'.

You might also try the "Alternate Display Mode" setting.

Slot 4 and 6 are usually default to 'slow' with a TWGS, the Zip allows
you to pick each slot's speed.

You could try it in slot 6, though if you don't have a 5.25" card,
that would be kind of interesting as you can't boot the floppy..  ;-)
--- SBBSecho 2.12-Win32