John, at 07:29 on Oct 15 1996, you wrote to Bill Grimsley...

JP> I tried using AT&N9 B1 S56=192 S34=128 and this seemed to 
JP> work. However, the verbal result code reported was CONNECT 
JP> 16800/ARQ/V32/LAPM/V42BIS.

BG> You probably forced a V.32ter 16k8 connect.

JP> Setting S34 to 128 disables V.32terbo.

It should, but the connect string above is NOT HST (and it can't be V.32bis
with a 16800 connect with V.32 modulation).  Had it been V.34 or V.FC, the
string would have said so, which really only leaves V.32terbo (which you
forced at 16800 with &N9).  If not, I'm open to further suggestion.  :)

BG> The Courier will always respond with HST in its connect 
BG> string (as long as &A3 is set) with an HST connect.

JP> &A3 is set in my default profile.

The default with early ROM revisions was &A1, but has since been changed.

Regards, Bill
@EOT:

--- Msgedsq 3.10