Hi Nancy,                                                            1/3

     About "TelNet File Transfers" of May 28:

NB> Craig...  ...the only thing that works is the kermit uploads.

     I could be mistaking but i believe Craig Healy is using `WC-Kermit'
even for what he called "RealKermit" UpLoads and it's slow at 100 cps...

BC> ...I telnetted to CHOWDA Net and uploaded this with Zmodem.
NB> Which telnet client is that?  And is it for DOS?
BC> ...I do windows as there were a lot of things I could not get
BC> software in DOS for.  But I still do a lot of things in DOS...
NB> I'll stay with DOS for absolutely as much as I can, thank you.

     I suppose that the following won't be of use to you right now since
you access the INet via DialUp, as i have myself in normal circumstances
until recently.  Though, i thought it might be of interrest to your guru
so i decided to post an `RLFossil'+`MS-Kermit' setup which i happened to
be testing with an ~NIC~ connected to a router (the later is linked to a
~DSL~ MoDem).  SysOps who can't get their `Kermit' support right for use
with in a .QWK door might find easier to make some adjustments this way:

_______________________________________________________[ `Launch.BAT' ]_
{at}Echo Off
If Not Exist PktChk.COM GoTo SetWatTCP
PktChk 0x60 0x69>Nul
If Not ErrorLevel 1 GoTo SetDOS

:SetWatTCP
LH RTsPkt.COM 0x60
If (%MyIP%)==() Set MyIP=192.168.1.101
If (%RemIP%)==() Set RemIP=192.168.1.1
If (%NetMask%)==() Set NetMask=255.255.255.0
If (%DNS1%)==() Set DNS1=206.47.244.88
If (%DNS2%)==() Set DNS2=206.47.244.138
If (%Domain%)==() Set Domain=sympatico.ca
If (%PeerMRU%)==() Set PeerMRU=1500
If (%MSS%)==() Set MSS=1460
If (%WATTCP.CFG%)==() Set WatTCP.CFG=C:\EtherNet
Echo Creating `%WatTCP.CFG%\WATTCP.CFG'...
Echo my_ip=%MYIP%>%WatTCP.CFG%\WATTCP.CFG
Echo gateway=%REMIP%>>%WatTCP.CFG%\WATTCP.CFG
Echo netmask=%NETMASK%>>%WatTCP.CFG%\WATTCP.CFG
Echo nameserver=%DNS1%>>%WatTCP.CFG%\WATTCP.CFG
Echo nameserver=%DNS2%>>%WatTCP.CFG%\WATTCP.CFG
Echo domainlist=%DOMAIN%>>%WatTCP.CFG%\WATTCP.CFG
Echo print="WatTCP configuration...">>%WatTCP.CFG%\WATTCP.CFG
Echo hostname="bbs">>%WatTCP.CFG%\WATTCP.CFG
Echo idname=p-200mmx>>%WatTCP.CFG%\WATTCP.CFG
Echo aamask=0000>>%WatTCP.CFG%\WATTCP.CFG
Echo cd_delay=72>>%WatTCP.CFG%\WATTCP.CFG
Echo nc_delay=18>>%WatTCP.CFG%\WATTCP.CFG
Echo term_type=vt100/115200>>%WatTCP.CFG%\WATTCP.CFG
Echo inport=0>>%WatTCP.CFG%\WATTCP.CFG
Echo outport=23>>%WatTCP.CFG%\WATTCP.CFG
Echo handshake=3>>%WatTCP.CFG%\WATTCP.CFG

:SetDOS
Rem In my example the 1st NON-EXISTANT Serial-Port is "COM3" by default.
Rem `RLF' is used by `RLFossil', `RLFi' (where "i" stands for indexed or
Rem incremented) is for `MS-Kermit' - ~FOSSIL~ ports numbering differ...
If (%RLF%)==() Set RLF=2
If (%RLFi%)==() Set RLFi=3
Set Port=%RLFi%
Set Init=Y
If Not Exist PktChk.COM GoTo Kermit
PktChk 0x60 0x69>Nul
If ErrorLevel 1 GoTo Error

:Kermit
Rem RLFossil.EXE %RLF% 1 "MSK315M.EXE -f ArcnRLFK.INI"
RLFossil.EXE %RLF% 1 "Kermit.EXE -f ArcnRLFK.INI"
If Not ErrorLevel 1 GoTo End
Rem Future revision

:Error
ClS
Echo An error has occured, there probably was no Packet-Driver found!

:End
Echo.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     The next file makes `MS-Kermit' connect thru `RLFossil'...  :)  Its
name reminds me that i 1st published it with `Arachne' in mind but yet i
can use it in this configuration;  i published an .INI file intended for
direct ~TCP~/~IP~ `Kermit' interfacing on my ~WEB~ site, many years ago.

[The present message continues next...]
--- Platinum Xpress/Win/WINServer v3.0pr5a