On Nov 16, 10:05=A0pm, mojoehand  wrote:


> Epson APL Board
> =A0 - I assume that it only supports Epson MX/FX printers.

The defacto 'standard' card, both software, hardware. The Epson
command set is like the AT command set. Nearly every printer does it.
This card works with nearly anything that connects to it. Even stuff
that is 20 years newer. It supports graphics and text. Straight simple
printing, no buffering, no bi-directional support, etc.


> MPC Peripherals AP80-B
> =A0 - Jumper near back edge.

Text only card. not many options.

> Orange Micro Orange Printer Interface
> =A0 - Not a Grappler. No switches.

Similar to the Epson APL.


> PPC-100 Tackler S
> =A0 - Slide switch on the front edge. Is this a Grappler compatible?

Tymac Tackler - this has print screen abilities and Epson emulation
for other printers that didn't support Epson ESC. It's Grappler
compatible.

> Sequential Systems Print Q
> =A0 - Four DIP switches near bottom center.

Epson APL compatible - Text/Graphics printing.

>
> I can take pictures if needed.
--- SBBSecho 2.12-Win32