On Thu 10 Oct at 11:33 Paul Chapman (3:632/309) wrote to All:

 PC> I've been using an Avtek FlashModem 288 v.34 with the Cooee 
 PC> comms package and want to know what is an acceptable 
 PC> CPS download rate using Z-Modem when I've connected at 
 PC> 28800/V34/V42BIS to a host system running Netcom 28.8's 
 PC> (ie Melb PCUG BBS during the morning) about 30km from 
 PC> where I live. The Avtek is using the Motorola chipset. 

Set it to train on medium bit error rate, retrain on medium bit error rate
and change some of the flow control settings:

Use the AT$H command to display the online help and perhaps use the
following settings:

&R        CTS normal operating state

&S1       DSR on when ready to accept data

%R2       Enable auto rate adaption, medium BER

\Q3       Enable bilateral CTS/RTS flow control
\X1       Pass XON/XOFF characters to remote DCE

*TH1      Medium V.34 rate selection threshold

ACTIVE PROFILE:                                      DTE =  38400 BPS  8/NONE/1
E0 H2 L2 M0 Q0 V0 X4 Y1 &C1 &D2 &G0 &L0 &M0 &P0
&R0 &S0 &T4 &X0 %A0   %B16  %C1
%D0   %L1  %R2 \A3 \B35  \C0 \G0 \J0 \K5 \M1 \N7 \Q3 \R1 \T0   \V4 \X1 *AS1    
*DG0 *DN0 *DR0 *FT0 *ID0 *MM0  *OR0 *RA0 *TD18 *TH1 *TL21                      
S00:002 S02:255 S03:013 S04:010 S05:008 S06:004 S07:030 S08:004 S11:080 S12:050
S18:000 S25:005 S26:000 S41:061 S42:050 S73:000 S74:015 S75:000 S76:015 S77:000

Motorola Lifestyle 28.8 External 68356 ROM  SW REV 2
S209415900 -01 08/03/95    8:00am

Apart from that, you might like to try disabling V.42bis BTLZ, but I
haven't had too many problems using them except to early V.34 modems using
the Rockwell 04BC datapump.

--- msgedsq 2.1