06-24-14 11:16 Roy Witt wrote to Ed Vance about Storage

 RW> @MSGID: 
 RW> Greetings Ed!
Howdy! Roy,
-snip-
 HG>> GM Ed,

 EV> GM Holger ... ._ __ ,

 EV>> __. ._. .. _.

 EV>   is easier written and read, hi.

 RW> --. is easier to read than __. = don't have to use the shift
 RW> key either.

 RW> Note the small space between the -- vs the non existant space
 RW> here __.

 RW> .... .- ...- .  .-  -.. .- -.--  -.-.--

I prefer using the Shifted Underscore Key because to me, using the
Hyphen Key makes the Morse Characters looks like they are being sent
with a Frequency-Shift Keyer for CW instead of turning the Oscillator
On and Off with a Telegraph Key.

. = Low Tone

- = High Tone

I still would prefer using the J-38 Key with the Plastic Base reversed
on the Key by removing the Two Screws, reversing the Base and
re-fastening the Two Screws.

I have a Vibroplex Bug too but found out I send better CW with the J-38
Key.

NNNN

... I just figured out PI to the seventy-fifth decimal place.                 

--- MultiMail/MS-DOS v0.49
--- SBBSecho 2.12-Linux