Hello Barry!
On 07 Dec 95, Barry Burke wrote to Michael Khanolkar:
 BB>         If you HAVE to use tape, cut the edge with a steel ruler first.
 BB> The factory edge on masking tape stimks.
 BB>         Better yet, use a product called "Bob Dively's Liquid Mask."
 BB> Paint it on, let it dry overnight, cut out your design, and peel away 
he
 BB>  mask where you wish to paint.  Put it on THICK, with runs and all, it's
 BB> much easier to cut and peel if you do.
A method that we use on RC planes all the time (don't know how well it
would work on the inside of a car body) is to mask normally, the spray
a light coat of clear over the tape.  The clear will leach under the
tape edges, but who cares... it's clear... anyways, the clear will seal
the edges, so the color coat won't seep under it.
When removing the tape, pull at a VERY sharp angle.
C-ya! Rich
--- GoldED 2.40
---------------