AL> First of all, I have an internal Logicode 33.6 modem, model
 AL> 33H-P-CL My question is what init strings do I use to force the
 AL> modem to connect at 24000, 26400, 31200, and 33600 respectively?
 BS> I too have a 33H-P-CL plug & pray modem.  Now that I have a new chip
 BS> from Logicode I can at least tell what the DCE speed is :-)))
 What was wrong before?
 
 BS> However, as far as the init string I sure hope you get an answer because
 BS> I have not been able to find it anywhere.  Certainly not in the 22 page
 BS> pamphlet that came with the modem.  There is a file called ATSUMM.TXT
 BS> from the Logicode web page but the best it can do is tell you that you
 BS> can force the following:
 BS>   F6   V.32 bis @ 4800
 BS>   F7   V.32 bis @ 7200
 BS>   F8   V.32 bis @ 9600
 BS>   F9   V.32 bis @ 12000
 BS>   F10  V.32 bis @ 14400
 BS> As I am sure you have discovered, there appears to be no documentation
 BS> as to the DCE speeds between 14.4 and 33.6 ...
 BS> I will watch this space for any replies that you may get.  Otherwise,
 BS> since the new chip this modem has performed superbly, connecting at
 BS> 31,200 99% of the time!
 So far, I've connected 26400-28800 to bbses with 28800 modems and 
28800-33600  to bbses with 33600.  But for some reason, when I connect 28800 
to a bbs with  a 33600, the whole connection freezes 30 seconds after I 
connect, then it  gives me the OK sign.
--- Maximus/2 3.01
---------------