Hi David and Allan also,
 DB> Bob Sturgeon wrote in a message to Allan Lee:
 DB> BS> However, as far as the init string I sure hope you get an
 DB> BS> answer because I have not been able to find it anywhere.
 DB> BS> Certainly not in the 22 page pamphlet that came with the modem.
 DB> BS> There is a file called ATSUMM.TXT from the Logicode web page
 DB> BS> but the best it can do is tell you that you can force the
 DB> BS> following:
 DB> BS>   F6   V.32 bis @ 4800
 DB> BS>   F7   V.32 bis @ 7200
 DB> BS>   F8   V.32 bis @ 9600
 DB> BS>   F9   V.32 bis @ 12000
 DB> BS>   F10  V.32 bis @ 14400
 DB> BS> As I am sure you have discovered, there appears to be no
 DB> BS> documentation as to the DCE speeds between 14.4 and 33.6 ...
 DB> Just a guess but going by the numbers you've posted, you could try
 DB> the following:
 DB>F11  16800
 DB>F12  19200
 DB>F13  21600
 DB>F14  24000
 DB>F15  26400
 DB>F16  28800
 DB>F17  31200
 DB>F18  33600
 DB> Please let me know if this does work.  Going by the Rockwell and
 DB> USR setups, this should work.  
Not as famous as my first words !
Well, it certainly looks like I put my foot in my big mouth this time. I
had never tried the "F" parameters and was just quoting from an online
document entitled "AT COMMAND SET SUMMARY FOR LOGICODE MODEMS".  Now I
have gone and tried the commands and only "F1" is acceptable, all the
others (from F2 to F18) are rejected as an ERROR, including the default
of "F0"!!!  I have no idea what "F1" does either :-((
So, maybe someone who has an in with Logicode support can provide the
answers to this one?
Bye for now ... Bob
 * SLMR 2.1a *  
--- Maximus 3.01
---------------