From: "as" 
Subject: Re: 3..12 Strangeness with binding IP
Date: 1998/08/22
Message-ID: #1/1
References: 
Organization: http://extra.newsguy.com
Newsgroups: fido.novell

The public sysbol msg is indicative of an nlm that needs to be loaded before
the nlm causing the error. I would
say the 3.x version is not loading an nlm that is required, that is also
loading in 4.11

If you are binding manually you should be able to insert the bind statement
as typed into the autoexec.ncf,
as there is functionally no difference.

Jim Huddle wrote in message ...
>Hi folks,
>
>Having a strange little problem with, actually two, but I degress.
>
>The real oddball is that after updating TCPIP.nlm to v4.016 IP no
>longer binds to the NIC via auotexec.ncf.  The driver reloads OK, but
>I end up having to bind manually.  The box is a Dell XE-166 with a
>3Com PCI NIC.  (Disclaimer: I didn't choose the box and I don't know
>why they don't use the onboard Intel NIC.)  It's not a killer, but it
>is irritating right now as I'm TSing hardware abends on two of these
>boxes.
>
>The other question has to do with a problem with loading DHCP.  This
>went flawlessly on an Intranetware box, but is givng me problems on
>the 3.12 boxes.  It installs fine, no errors shown, but when I attempt
>to load the dhcpsrvr or dchpcfg it fails to auotload dhcpio.  It's
>giving me:
>
>   Loader cannot find public symbol LoadLanguageMessageTable
>   Load file referenced undefined public variable.
>
>The box is patched up with 312ptd and Config Reader offers no
>suggestions for any needed updates
>
>I'd appreciate any input.
>
>Thanks!
>
>Jim Huddle, CNE CBS