On Sun, 01 Mar 2020 19:10:40 +0100, Deloptes  declaimed
the following:

>
>It turned out that the card to boot from must be inserted when
>updating/writing the eeprom.
>I hope this helps someone in future.
>

 That would seem to have been rather explicit in the article I'd
referenced earlier... That the boot sequence checks the SD card for
recovery.bin /before/ checking the EEPROM for boot sequence. If the SD card
wasn't there, booting would move immediately to the EEPROM sequence.


--
 Wulfraed                 Dennis Lee Bieber         AF6VN
 wlfraed@ix.netcom.com    http://wlfraed.microdiversity.freeddns.org/

--- SoupGate-Win32 v1.05