Hi Allan ... on 24 May 97 you cried out for help!
 AL> First of all, I have an internal Logicode 33.6 modem, model
 AL> 33H-P-CL My question is what init strings do I use to force the
 AL> modem to connect at 24000, 26400, 31200, and 33600 respectively?
I too have a 33H-P-CL plug & pray modem.  Now that I have a new chip
from Logicode I can at least tell what the DCE speed is :-)))
However, as far as the init string I sure hope you get an answer because
I have not been able to find it anywhere.  Certainly not in the 22 page
pamphlet that came with the modem.  There is a file called ATSUMM.TXT
from the Logicode web page but the best it can do is tell you that you
can force the following:
  F6   V.32 bis @ 4800
  F7   V.32 bis @ 7200
  F8   V.32 bis @ 9600
  F9   V.32 bis @ 12000
  F10  V.32 bis @ 14400
As I am sure you have discovered, there appears to be no documentation
as to the DCE speeds between 14.4 and 33.6 ...
I will watch this space for any replies that you may get.  Otherwise,
since the new chip this modem has performed superbly, connecting at
31,200 99% of the time!
Bye for now ... Bob
 * SLMR 2.1a *  
--- Maximus 3.01
---------------