Dave Muscato wrote in a message to Dan Bridges:
 DM> Chars sent           16125      Chars Received      21124
 DM> Chars lost               0      Octets sent         16125
 DM> Octets Received      21124      Blocks sent           638
 DM> Blocks Received        739      Blocks resent        1954
 DM> Retrains Requested       0      Retrains Granted         0
 DM> Line Reversals           0      Blers                19330
 DM> Link Timeouts          119      Link Naks              128
 DM> Data Compression       NONE
 DM> Equalization           Long
 DM> Fallback               Enabled
 DM> Protocol               LAPM 128/15
 DM> Speed                  28800/28800
 DM> Last Call              00:53:37
Blech!  Looking at just the Blers says that this was a truly lousy connect.  
The total blocks sent/received is 15% of the errors while a 5% error rate is 
more normal.  Does this happen if you force the connect at a lower speed?  It 
seems very strange that with that level of errors, there were no speedshifts 
and no retrains.  The only time I've seen this before was on a connect where 
the modem at one end was locked (&n14, &u0).
 DM> RX Upshifts              0
 DM> RX Downshifts            0
 DM> TX Speedshifts           0
 DM> x2 Status                Remote modem is not x2
Regards,
       David
--- timEd/2 1.10+
---------------