Trev Roydhouse wrote in a message to Fred Busch:
 TR> (2) Request for modem info. Result: big result here folks,
 TR> what was it? Four responses.  
Here's mine for a USR Courier DS 16.8.  I'm probably one of the few using one 
of these beasts anymore.  Running under OS/2.
           COURIER HST DUAL STANDARD SETTINGS - Jack Stein
******************************************************************
External switchblock: 1-UP  2-UP  3-DOWN  4-UP     5-DOWN
                      6-UP  7-UP  8-DOWN  9-DOWN  10-UP
                                            WIDE SWITCH-UP
******************************************************************
ati5
USRobotics Courier 16800 HST Dual Standard Fax NVRAM Settings...
**************************************
 Default      BBS(ATZ) (* denotes change from default)
===================================================================
 DIAL=PULSE   DIAL=TONE
 ON HOOK
 TIMER
 B0           B0
 C1           C1
 E0           command mode echo (DIP SW 4) 0 OFF 1 0N
 F1           F1   online echo -1-(full duplex) echo off
                                   2 (half duplex) echo on
 M1           M3*  speaker - 0 off,1-on till carrier,
                   2 = on 3 = on after dial until connect.
 Q0           Q0   result codes displayed
 V1                                result code verbal mode (V0 numeric mode)
 X1           X7*  result code options 7 shows all
 BAUD=2400    BAUD=19200
 PARITY=N     PARITY=N
 WORDLEN=8    WORDLEN=8
 &A1          &A3* ARQ,LAPM,HST,MNP,SYNC,NONE,v42bis,MNP5 result codes
 &B0          &B1* DTE/DCE rates fixed at DTE setting
 &C1          &C1  CD sent on connect
 &D2          &D2  DTR required for modem to accept commands
                   Dropping DTR terminated call.
 &G0          &G0  No guard tones (USA) 1 Europe 2 UK
 &H0          &H1* recieve HDware flow cntrl,2 xon/off,3 both.
 &I0          &I0  transmit flow cntrl disabled 1-5 see manual
 &K1          &K3* K3 turns OFF MNP5 compression
 &L0          &L0  phone line (1=leased line)
 &M4          &M4  Normal/Asynchronous ARQ connections
 &N0          &N0  negotiate highest poss. link rate
 &P0          &P0  US make/break rate (1 UK contries)
 &R1          &R2* Recieved data sent to DTE only when
                   RTS is high. &R1 ignors RTS!
 &S0          &S0  DSR always on
 &T5          &T5  modem testin prohibit RDL
 &X0          &X0  use modem transmit clock
 &Y1          &Y0* 0 don't send break 1 send break immediatly
 %R0          %R0 Rack Controller unit (RCU) disabled
S00=000
S01=000
S02=043       S02=043
S03=013       S03=013
S04=010       S04=010
S05=008       S05=008
S06=002       S06=002
S07=060       S07=030* seconds to wait for carrier
S08=002       S08=002
S09=006       S09=006
S10=007       S10=007
S11=070       S11=070 spacing for tone dialing in milliseconds
S12=050       S12=050
S13=000       S13=000
S14=001
S15=000       S15=000 Note: transmit buffer 1.5k by default
S16=000                     setting S15=8 decreases it to 128bytes
S17=000                     this may fix non-mnp hangups after d/l's
S18=000
S19=000       S19=000
S20=000
S21=010       S21=010
S22=017       S22=017
S23=019       S23=019
S24=150       S24=150
S25=005       S25=005
S26=001       S26=001
S27=000       S27=128* force 9600 return strng for 9600+ connects
S28=008       S28=008
S29=020       S29=020
S30=000
S31=000
S32=001       S32=008* changes voice toggle switch to busy/not busy
S33=000       S33=000
S34=000       S34=000
S35=000       S35=000
S36=000       S36=000
S37=000       S37=000
S38=000       S38=000
S39=000
S40=000
S41=000       S41=000
S42=126       S42=126
S43=200       S43=200
S44=015       S44=015
EQUIPMENT SECTION
        %
        OUTPUT  COM2
%
        BAUD Steady  %not needed if the Fossil is locking the baud.
%                      see opus freq. asked questions.
       BAUD Maximum    19200
       INIT            |~~~ATZ|
       DIAL Prefix     |~~~ATB1DT
       DIAL Predial1   |~~~ATB1DT
       DIAL Suffix     |
       BUSY            ATM0H1|   
       AUTOANSWER      ~~~AT~~B0~~A|
       MASK Carrier    128             % (80 hexadecimal)
       MASK Handshaking        XON
       MASK Handshaking        CTS
% comment out send break to clear buffer to see if disconnects
% after D/L stop. 
       SEND Break to clear buffer
       SLOW Modem
%       MOUSE
        %
END EQUIPMENT SECTION
                                              Jack 
--- timEd/2-B11
---------------