From: "Kevin D. Snodgrass" 
Subject: Re: Memory > 16MB not detected
Date: 1998/05/15
Message-ID: #1/1
Content-Transfer-Encoding: 7bit
References: 
Mime-Version: 1.0
To: Andreas Steidl 
Content-Type: text/plain; charset=us-ascii
Organization: Radiks Internet Access
Newsgroups: fido.novell


Andreas Steidl wrote:
> 
> I am using a Novell 3.12-System with an EISA-Motherboard. Till now it
> works fine. After an Upgrade with a new SCSI-Harddisk (4GByte) and
> Memory from 16MB to 52MB the server doesn't allocate the Memory > 16MB
> under Novell (command MEMORY). If I use REGISTER MEMORY 1000000 2400000

You should NEVER have to register memory on an EISA or PCI
motherboard.  If NetWare does not recognize all memory run
the EISA config util, make sure the correct amount is
reported there and SAVE the config to non-volatile RAM.

If you still have problems consult the NetWare FAQ
http://netlab1.usu.edu/novell.faq/nov-faq.htm and browse
around for more useful info there.

-- 
Kevin D. Snodgrass