-=> Quoting Jean Parrot to Bruce Clark <=-

 BC> Make sure there is an entire path listed to the BWPACK.BAT file. 
 
 BC> Edit the file, so that each command line used has an entire path 
 BC> listed: 
 
 BC> {at}ECHO OFF
 BC> GOTO %1
 BC> ECHO.
 BC> ECHO The parameter "%1"
 BC> ECHO was not recognized.  Valid values are:
 BC> ECHO ZIP, OLDZIP, ARJ, LHA, PAK, ARC, and AUX.
 BC> ECHO Please re-check the BWREPFIX.DOC file and your Blue Wave Archiver
 BC> ECHO configuration, and make sure your archivers are configured
 BC> correctly. ECHO.
 BC> PAUSE
 BC> GOTO END
 BC> :ZIP
 BC> C:\BWAVE\BWREPFIX.EXE %3
 BC> C:\BWAVE\PKZIP -ex %2 %3

 JP> This I will looke at again. I guess that all that follows is
 JP> not relevant ???  Only :zip is required here, no ?

I only included through ZIP as an example. 
If you never plan to use the other programs, then no need to put the 
path in for them, especially if you don't have some of them. 

 
 BC> GOTO END
 BC> :OLDZIP
 BC> C:\BWAVE\BWREPFIX.EXE %3
 BC> C:\BWAVE\PKZIP.EXE -e0 %2 %3
 BC> GOTO END
 BC> -- SNIP --
 BC> :END

In your case, I should have changed C:\BWAVE\ to D:\BWAVE\


 JP> The test ran nicely. Here is a goodbye !


 
___ Blue Wave/386 v2.30
--- Platinum Xpress/Win/WINServer v3.0pr5a