On Fri, 31 Jan 2020 17:01:57 +0100, "Wendelin Uez" 
declaimed the following:

>I have a Raspberry 3B+ and wrote the NextCloudPi_RPi_12-20-19 image by
>Win32DiskImager onto my 32GB microSD card.

 Just an FYI: Win32DiskImager has been deprecated by many sites in favor
of using Etcher to write to flash memory. Etcher can even recognized some
compressed file formats so one does not have to always unpack the archive
first. (Win32DiskImager does still have a minor usage -- it can create an
image file FROM flash memory; though that image is only usable later if the
destination memory is identical or larger -- an SD card that claims to be
the same size may have reserved more space for internal usage and won't
take the image)

>I am not familiar with Raspis, this is my first trial.UIsing the initial SD
>card coming with the starter kit a standard Raspbian OS came up completely
>and worked . Therefore I wanted to now to come up with the NextCloudPi
>image.
>

 Since Raspbian is based upon Debian, I'd probably download the most
recent full NOOBS installer
  https://www.raspberrypi.org/downloads/noobs/
write that to the SD card and run it, letting it install the Raspbian OS.
After confirming a working Raspbian (including running "sudo apt update"
"sudo apt upgrade" to ensure it is current, and enabling SSH [disabled by
default]), I'd THEN execute the "curl" command shown for nextcloudpi
  https://ownyourbits.com/nextcloudpi/#content_start
to install/build it on the (Raspbian) system itself.

 There are a lot of hits on Google for
  "Started Update UTMP about System Runlevel Changes" -- though not
R-Pi specific. Best suggestion is to check the screen log for other
messages that might indicate something failed before that point.


--
 Wulfraed                 Dennis Lee Bieber         AF6VN
 wlfraed@ix.netcom.com    http://wlfraed.microdiversity.freeddns.org/

--- SoupGate-Win32 v1.05