From: Joe Curran 
To: 'Arthur' , atm{at}shore.net
Reply-To: Joe Curran 


I went to Wal-Mart's crafts department and obtained an 8 1/2 x 11 x.06
black foam sheet.  I cut it down to about 5x7 and just patched the area
where I moved the focuser.  The previous hole was still there, but at least
it looked nice from the outside.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

I mistakenly messed with the focal length of all my optics, and made the
tri-point, screw in mirror cell holes 1/2 inch oblong Inaddition, I moved
the spider down with the new holes centered between the origian two.Stupid,
yes I know, but I did it. Now I need help determining how to fix this mess.
My questions are:

1.  how do I fill in the holes (with what substance), and redrill the
original holes,or

2. fill those holes and re drill new holes for the mirror cell and spider a
half inch or so to the left or right; but if I do this, what will be the
out come in relation to the focuser hole?

--- BBBS/NT v4.01 Flag-4