> terms for me to understand.  That is, will Opus then respond
 > to
 > callers who connect at 2400 baud just as it always has,
 > etc., the
 > only difference being with connects of over 16.8k?  Also,
 > if
 > anyone knows how to tell a USR Courier v.Everything modem
 > to
The only way to tell a v.everything to report to Opus without using a 
frontend is set S27=128.  This will report a 9600 baud connect with anything 
above 9600.   With the usual hayes type aka rockwell chipsets set the W param 
to W0 and don't forget to AT&W afterwards for both modems.  You can still 
lock the port at whatever you like (not to excede 57600 with 1.79) and you 
will still get great CPS.
 
        TTYL....Lloyd
--- Opus-CBCS 1.79.x
---------------