From: "Archmage" 
Subject: Re: Please Help with Setup Netware 3.12
Date: 1999/04/22
Message-ID: #1/1
References:  
NNTP-Posting-Date: Thu, 22 Apr 1999 08:01:30 CDT
Newsgroups: at.novell,comp.sys.novell,eduforums.novell.com,fido.ger.novell,fido.novell,fido.novell-ch


User  wrote in message
news:371E6E4C.5A600ED6@seqwb.com.au...
> you need to log on at a workstation and log in a admin then run syscon
from a
> dos prompt.Of course you need to load the client files on the workstation
> first.. Hope this helps..

1st. you login as supervisor on a 3.x network not as admin... admin is for
4.x networks..
after you login at a workstation, you can then run the syscon util. which is
found on the sys volume.

Greg Perry
Novell Network Administrator
Certified Novell Administrator
gperry@computerlands.com


>
> Mark Dawson wrote:
>
> > Ok I am just learning Novell so please do not think I am stupid.  I only
> > have experience with.  NT Server.  I have set up a NetWare 3.12 server,
> > created and mounted my NetWare volumes, loaded my Ethernet card and
bound
> > IPX  to the card.   All goes well.  I know how to use the Install and
> > monitor modules but what do I do next.   How do I set up users and
> > applications.  The install manual says I can just build a tree structure
and
> > use SYSCON to add users.  But what do they mean.  My server prompt does
not
> > know the SYSCON command .. Where do I start what do I type to begin
setting
> > things up .  Do I do it at the prompt when I boot the server or do I
have to
> > load some NLM.     How can I view what is on my NetWare volumes.
> >
> > Thanks ......  From a NEW USER....