From: User 
Subject: Re: Please Help with Setup Netware 3.12
Date: 1999/04/22
Message-ID: #1/1
Content-Transfer-Encoding: 7bit
References: 
Content-Type: text/plain; charset=us-ascii
Organization: Customer of OzEmail/Access One Pty Ltd, Melbourne, Australia
Mime-Version: 1.0
NNTP-Posting-Date: 22 Apr 1999 00:34:13 GMT
Newsgroups: at.novell,comp.sys.novell,eduforums.novell.com,fido.ger.novell,fido.novell,fido.novell-ch

you need to log on at a workstation and log in a admin then run syscon from a
dos prompt.Of course you need to load the client files on the workstation
first.. Hope this helps..

Mark Dawson wrote:

> Ok I am just learning Novell so please do not think I am stupid.  I only
> have experience with.  NT Server.  I have set up a NetWare 3.12 server,
> created and mounted my NetWare volumes, loaded my Ethernet card and bound
> IPX  to the card.   All goes well.  I know how to use the Install and
> monitor modules but what do I do next.   How do I set up users and
> applications.  The install manual says I can just build a tree structure and
> use SYSCON to add users.  But what do they mean.  My server prompt does not
> know the SYSCON command .. Where do I start what do I type to begin setting
> things up .  Do I do it at the prompt when I boot the server or do I have to
> load some NLM.     How can I view what is on my NetWare volumes.
>
> Thanks ......  From a NEW USER....
> --
>
> EMAIL     dawsonma@carrollsweb.com
> ICQ#       36265794
>
> >>>>  You Can Page me online through my Personal Communication Center
> located at: http://wwp.icq.com/36265794
> >>>> You Can Send me E-mail Express directly to my computer screen by using
> the address 36265794@pager.mirabilis.com
>
> Mark Dawson
> ----------------------------------------------------