Paul West wrote in a message to Don Guy:
 PW> In a message to All  Don Guy wrote:
 DG> Has anyone had any success getting the above to work? It seems that
 DG> no matter what I try, Telix can't find anything the virtual com port.
 DG> I'm using:
 DG> Device=C:\SIO\SIO.Sys  (1,3F8,4) (3,3E8,4) (4,Internet:2E8,None:4)
 DG> Device=C:\SIO\VSIO.Sys (1,3F8,4) (3,3E8,4) (4,Internet:2E8,None:4)
 PW> First off, remove the options from VSIO.SYS.  All the
 PW> options go on SIO.SYS. 
 PW> Here's Mine: (Mouse on Com1).
 PW> DEVICE=C:\SIO\SIO.SYS (COM2:115200,02F8,3,-)
 PW> (COM3:38400,03E8,11,-) (COM4,INTERNET:02E8,NONE:12,-)
 PW> DEVICE=C:\SIO\VSIO.SYS
 PW> DEVICE=C:\SIO\VX00.SYS
Nothing stops you from doing the following:
 DEVICE=C:\SIO\SIO.SYS (com1,internet:3f8,none:4,-) (COM2:115200,02F8,3,-)
 (COM3:38400,03E8,11,-) (COM4,INTERNET:02E8,NONE:12,-)
or even this way...
 DEVICE=C:\SIO\SIO.SYS (COM1:115200,02F8,3,-) (COM2:38400,03E8,11,-) 
(COM3,INTERNET:02E8,NONE:12,-) (com4,internet:3f8,none:4,-) 
Remember, SIO com ports and used ports and whatever port the mouse are using 
are two seperate things and are irrelevant to each other. 
In the base 4 port SIO, you can't define internet ports higher than com4, yet 
you can certainly fill in ports as I have described above. 
Dave Calafrancesco, Team OS/2
dave@drakkar.mhv.net
... They got the library at Alexandria, they're not getting mine! 
--- 
---------------