From: bubbler86@aol.com (Bubbler86)
Subject: Re: Starting Novell-server
Date: 1999/07/25
Message-ID: #1/1
References: 
Organization: AOL http://www.aol.com
Newsgroups: fido.novell

To see the startup.NCF you will nead to load server.exe with the following
startup switch "-NS".  You can then load the modules one by one (you can read a
copy of your startup ncf by loading the edit program or from the install (NW3
and4) or NWconfig (NW5) screen.

If you want to see the autoexec.ncf put a line at the start of it loading the
conlog program, then a line at the end unloading conlog.  After it is finished
loading you can then go to your "ETC" directory and view console.log.

Jeff