BB>
NOTE: IceEdit 2.20 [Eval]
BB>
MSGID: 1:260/432 a183052c
BB>
PID: Telegard 3.02/mL
BB>
TID: FastEcho 1.45a 8612
BB>I really don't know how to explain it but whenever somebody loses carrier, 
BB>the modem does not reset properly. It shows the RD & SD Lights flashing 
and 
BB>the Bulletin Board screens still show up, etc... I have to turn the modem 
off 
BB>to get it to reset and its only when a user drops carrier. When a normal 
ATH0 
BB>hangup its fine.
BB>What should I check?
Barry,
  It's been awhile, can you remind me exactly which version modem you
have?  If you could, just post the AT-i3 results.  Are you seeing the
above behavior every time someone drops carrier?  What modem init string
are you using?  Be sure that you are setting &D2 or &D3.  If you are
using &D2, you might try &D3.  Also, what you are seeing could be due to
the modem trying to send buffered data after the caller drops.  Try
setting S38=0 to set the hang up time out to 0.
Michael -- Hayes Online Services
--- FLAME v1.1
---------------