::> Has anyone had any success getting the above to work? It seems that no 
at
::> what I try, Telix can't find anything the virtual com port. I'm using:
Don,
  I use Telix/VModem all the time. It was quick and easy to set up.
::> Device=C:\SIO\SIO.Sys  (1,3F8,4) (3,3E8,4) (4,Internet:2E8,None:4)
::> Device=C:\SIO\VSIO.Sys (1,3F8,4) (3,3E8,4) (4,Internet:2E8,None:4)
First off, the VSIO.SYS doesn't take parameters. You might also want to
capitalize the Internet and None.
My lines look like this:
E:\SIO\SIO.SYS (COM1,INTERNET:3F8,NONE:4) (COM2:57600)  {line wrapped}
                             (COM4,INTERNET:2E8,NONE:3)
E:\SIO\VSIO.SYS
Next, before starting Telix, you need to run the VMODEM.EXE program. It *HAS*
to be running and will provide the com ports defined as INTERNET on the SIO 
line.
Next, load up Telix. Make sure it's set for the correct comm port/addr/irq.
It should then work. VModem provides a scaled down list of AT responses
(OK, NO DIALTONE, RING,...) but its enough :)
#  Herbert Bushong    harchon@centuryinter.net       [TEAM OS/2]    
-  Blackbeard's BBS   Intelec: 239:600/0            
+  Fido: 1:19/19      http://www.win.net/eunicecity/stltcc/hbush/
---
   RM 1.31 2508   EASTER BUNNY? Sure, kids, right here at the dinner table...
---------------