From: Steve McGrane 
Subject: Re: Nw3.11 and new hardware -
Date: 1998/04/21
Message-ID: #1/1
Content-Transfer-Encoding: 7bit
References:  
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Organization: EarthLink Network, Inc.
Newsgroups: fido.novell


You should have a DOS/Windows  machine somewhere in DOS, use RCONSOLE and PC
Magazine's PRN2FILE utility.  In Windows, open a DOS window, use RCONSOLE and
simply CUT and PASTE.

Barry Block wrote:

> Hello Ken,
>
>   -> loading the necessary modules. If I can find a way to capture the
>   -> screens as the server installs I will post them.
>
>  KD> If you do, let me know how you did this.  OR If ANYONE knows how
>  KD> to do this, please let me know.  It's baffled us for quite some
>  KD> time and would be quite useful at times.
>
>      I think it could be done by writing a device driver.
>      Put it in config.sys and everything that uses a bios or dos write gets
>      intersected and sent to a file in the boot drive and then passed on.
>
>      Somebody must have written this by now :-)
>
> Regards, Barry