On Tue 26 Nov at 20:16 Steven Anderson (3:623/683) wrote to All:

 SA>  G'day Everyone..

 SA>  Id just like to no, Can you use HST or not (austel rules?) 
 SA> , As my mate on a VERY BAD LINE cannot connect using 
 SA> V.34, V.fc or V.32Bis, V.32 etc, He CAN get a 2400 
 SA> connect or if he uses HST he can get 16k8..

 SA>  Pretty sad when the latest protocols die and good old HST 
 SA> powers on at 16k8! (non HST = 2400 - 4800 :(

What was the latest from Frank Nitzsche (02 9396 3053) on that case?

Austel TS-002 simply requires a 2100 Hz tone or voice announcement when a
call is answered automatically. 

If you set B0 in NVRAM then dial out with B1 (plus other commands as
documented in the USR_MODEMS echo), you should be able achieve HST mode
without violating Austel requirements.

One suggestion in USR_MODEMS was: ATS54=192S56=192B1DT

Regards,

Arthur.

--- msgedsq 2.1