| TIP: Click on subject to list as thread! | ANSI |
| echo: | |
|---|---|
| to: | |
| from: | |
| date: | |
| subject: | Re: [drakelist] Re: R4B problems |
From: Garey Barrell
Subject: Re: [drakelist] Re: R4B problems
Garey Barrell made an utterence to the drakelist gang
----------------------------------------------------------------------
John -
Good idea. That's the "other" possibility! Again, with a general
coverage receiver you should be able to hear the PTO running from
about 4.955 to 5.455 with the 4.955 at the "top" of the dial or .500.
73, Garey - K4OAH
john wrote:
> "john" made an utterence to the
drakelist gang
> ----------------------------------------------------------------------
>
> Sounds like it may be possible that you're not actually changing
> frequency. Can you turn the calibrator on and hear and "tune
> through" the crystal calibrator signal, to help make sure
> the PTO is working?
>
> John K5MO
>
>
----------------------------------------------------------------------
On Behalf of Garey Barrell
Submissions: drakelist{at}www.zerobeat.net
Unsubscribe: majordomo{at}www.zerobeat.net - unsubscribe drakelist in body
Hopelessly Lost: majordomo{at}www.zerobeat.net - help in body of message
Zerobeat Web Page: http://www.zerobeat.net
Brought to you courtesy of TLCHost.net http://www.tlchost.net/
----------------------------------------------------------------------
---
* Origin: The Barter Board Internet Gatway (1:261/1551)SEEN-BY: 633/267 270 5030/786 @PATH: 261/1551 105/1 261/1352 38 123/500 106/2000 633/267 |
|
| SOURCE: echomail via fidonet.ozzmosis.com | |
Email questions or comments to sysop@ipingthereforeiam.com
All parts of this website painstakingly hand-crafted in the U.S.A.!
IPTIA BBS/MUD/Terminal/Game Server List, © 2025 IPTIA Consulting™.