Rom code 1.440-18 is on www.supra.com.
Also available for FREQ here, Filename: 12014418.ZIP
(SupraFax 288 w/led Version) U must be using 1440-12 or
better to use this rom code.
-= Changes between the Supra 288 1.440-17 and the 1.440-18 ROM Code =-
1) In Synchronous Access Mode when an EM command was
received the modem would switch to command mode and
respond with "OK" without sending the EM response
first. It now sends the EM response prior to the
"OK" response.
2) When originating a call the modem will set the maximum
projected data rate for the 3429 symbol rate to 33.6Kbps.
This allows calls to USR modems to connect using the 3429
symbol rate.
3) The V.42bis code was optimized to improve the compression
performance.
4) When the country code is set to a non-US value Bell mode
is disabled when the modem is reconfigured to a factory
configuration. (ie. &Fn sets B0 not B1 outside the US)
5) The EQM thresholds that control rate renegotiations to
higher rates were slightly decreased. With the v1.440-17
firmware some lines would ping/pong between a high and
low data rate, reducing the fall forward threshold prevents
this.
5) When bit 5 of S192 is set the EQM connection thresholds
are lowered, making the modem more conservative when
choosing data rates.
6) A problem with the datapump configuration during a V.34
connection using the 3000 symbol rate at a data rate of
26.4Kbps was fixed.
7) A change was made to how MP sequences are transmitted during
phase 4 of a V.34 connection. This decreases the chance that
the MP sequence will not be correctly received by the remote
modem which causes the connection sequence to restart.
9) The LAPM selective repeat feature (SREJ) is now enabled by
default in all modems.
Nico van Royen *Sysop* /wARP/ /MAiL/ /hQ/
------------------------------------------------------------
CNet/3 MailManager 1.2x GMS Mailer 1.1.86
... Choosy hackers choose .GIF!
--- Mail Manager 1.2x/n #1067
---------------
* Origin: WARP MAiL hQ +31-71-5411907 [AMiNET MiRROR] 33k6 (2:281/417.0)
|