| TIP: Click on subject to list as thread! | ANSI |
| echo: | |
|---|---|
| to: | |
| from: | |
| date: | |
| subject: | 1998 saturn sl2 1.9l |
RW> RS> Was wondering I recently have one heck of a noise and shake comming RW> RS> from my RW> saturn 1.9liter engine From what i can see at looking at RW> RS> the Belt tensioner it seems to be Jumping RW> around quiet a bit , is RW> RS> it possible that the bearings in the tensioner may RW> be shot and this RW> RS> is what is causing the shake RW>Yeup... RW> RS> , and the really bad rattle RW> noise , its like the exhaust heat RW> RS> shield is rattling , but if you drive it RW> and idle high the noise RW> RS> goes away , RW>The bearing is worn and loose, but is re-tensioned by the change in engine RW>speed, creating a quiet mode of operation. I'd bet that it will come back RW>at a different, especially higher engine speed. RW> RS> its mainly when your at idle or put it in RW> like drive or reverse , RW> RS> reverse especially it vibrates like crazy I didnt notice any of the RW> RS> mounts on the engine to be bad RW>Buy a new tensioner and replace it or have your mechanic do it for you. RW>That should fix the noise and shaking. That was my thought also. As I recal the maximum load in on the tensionor with the engien stolled ans runing at Idel. As the engine speeds up the loading on the Tensionor lightens up slightly --- þ SLMR 2.1a þ 0* Origin: Since 1991 And Were Still Here! DOCSPLACE.TZO.COM (1:123/140) SEEN-BY: 3/0 633/267 640/954 712/0 313 550 620 848 953 @PATH: 123/140 500 261/38 712/848 633/267 |
|
| SOURCE: echomail via fidonet.ozzmosis.com | |
Email questions or comments to sysop@ipingthereforeiam.com
All parts of this website painstakingly hand-crafted in the U.S.A.!
IPTIA BBS/MUD/Terminal/Game Server List, © 2025 IPTIA Consulting™.