From: "Patrick Hornung" 
Subject: Re: Novell 4 & 5 demos will not install
Date: 1999/06/10
Message-ID: #1/1
Cache-Post-Path: axilla.wwnet.net!unknown@zzz-209252121047.splitrock.net
References: 
Organization: USA Best Net
NNTP-Posting-Date: Thu, 10 Jun 1999 14:02:48 EDT
Newsgroups: fido.novell

I had the same problem earlier this week with 4.11
make sure your dos partition is not formatted for FAT32.  When I formatted
the drive with FAT32, the language menu came on and then I had a blank
screen, except for the cursor in the upper left corner blinking.  With a dos
6.2 boot disk (or even a setup disk from win95a), boot the computer and
fdisk and format.  make sure you have your cdrom drivers installed.
Everything should go smoothly after this.
Waz  wrote in message
news:7iptjq$cgk$1@news5.svr.pol.co.uk...
> Please Help !
>
> I am looking towards starting my CNE for Novell 4 and possibly 5 and have
> managed to aquire the 2 and 3 user versions for both operating systems.
> Unfortunatly I cannot get either to install. I have a Celeron 333 based
> machine with 64Mb Ram installed and have also installed Windows 95 on the
> machine.
>
> After booting to WIn95, I press F8 to get the menu and only select the
> "Command Prompt". I dont know if I need to boot with an old MSDos 6.2
disk.
> Please advise. Anyway, with Netware 4, I get to the prompt when it asks me
> the language, I select English and then a freeze and a blank screen - I
have
> to switch off that point.
>
> With Novell 5, It runs though quite happily and displays the message
> "matching drivers to hardware" and then once the IDE disk has been
located,
> it says no storage device available on this machine.
>
> Any help would be appreciated.
>
> Thanks.
>
> Waz
>
>