From: "VTI Zandhoven" 
Subject: Problems with startup Novell3.12-server
Date: 1999/03/23
Message-ID: #1/1
Organization: Planet Internet NV
NNTP-Posting-Date: 23 Mar 1999 09:44:51 GMT
Newsgroups: fido.novell

I've installed a new server with Novell 3.12.
This is the configuration:
P-II 350 MHz
IDE-HD Quantum 10GB
128 SDRAM
Networkadaptor: Genius Lan GE2500III

When I start the server manually, there are no problems.
But when I start with the startup.ncf and the autoexec.ncf then I've
problems.
When the server tries to mount the third volume, he sends a message that
there's not enough memory.
The startup.ncf looks like this:
Load isadisk port=1f0 int=e

The autoexec.ncf looks like this:
file server name SERVER_VTI
ipx internal net 36E3E95C
register memory 1000000 7000000
load keyb france
mount all
load c:\server.312\landrive\pcisrv port=e400 int=5 frame=ethernet_802.2
bind ipx to pcisrv net=00054321
load remote asap
load rspx

I've seen that by the automatic start between startup and autoexec, the
sys-volume becomes mounted. The register memory command recognizes the 128
MB RAM but by mounting the other volumes it gives yet an error-message of
not enough memory.

Who can give a solution?
Thank you very much.
Norman Sterkens
norman.sterkens@village.uunet.be