From: "P.W. Hooftman" 
Subject: Re: HELP ME!! 3.12 100 user to 3.2 250 user upgrade.
Date: 1998/08/19
Message-ID: #1/1
References: 
Organization: Wirehub! Internet
Newsgroups: fido.novell

As far as i know an upgrade form version x to version y applies to the same
number of users. I.e. you can only upgrade from 3.12 250 user to 3.20 250
user.  So ...
- you need to buy 3.12 150 user first
- or buy an 100 user upgrade plus an 3.20 150 user

Both are not available anymore.....

Verify this with Novell to see if i'm right.

--
Remove AT for reply
HavenzksAT@wirehub.nl
Craig heeft geschreven in bericht ...
>HELP ME!!
>
>Before I start I have posted a few messages about my problem but nothing
>came of them. I hope that there is someone out there who can help me as I
am
>about to get a severe kicking from the boss if I don't sort it out.
>
>The beginning.
>I have a server running Novell 3.12 100 user.I bought a 3.20 250 user
>upgrade.I thought this a good idea as I was getting close to the 100 user
>limit and I could be YK2 ready. So far so good.
>I upgraded the server from the CD provided and everything seems ok. I get
>the "Netware 3.2 Enhancement Pack" in my Currently Installed Products
screen
>(In install from the server console).
>
>What's the problem you say??
>
>I have a disk that is labled "Netware 3.2 Upgrade" which is my 250 user (I
>presume). I ran a file called "NUNLOCK.EXE" which went through the
>activation key setup and then basically turned the disk into a server boot
>disk.
>
>Where do I go from here?? I have tried copying the Server.exe to the server
>but I get a fair few errors and then cannot load any NLM's.
>
>What is the point of the Server boot disk??
>
>I seem to be now YK2 ready but I really need to have the 250 user licence
up
>and running. I have tried Novell but they wanted me to use a �1.50 per
>minute phone number. That's a little steep don't you think??
>
>Any help will be greatfully accepted (If your in Notts or Derbys,UK then a
>beer will be supplied!!)
>
>Thanks in advance.
>
>--
>drop mypants to E-Mail me
>
>Craig
>
>