On 16-11-19 09:36, R.Wieser wrote:
> Asking for a method that will do a pinnumber translation (using its internal
> tables) is probably too much to ask for too ?

Just make one yourself, if you really need it. I suspect you don't
really need it, though; all your problems seem to stem from
inflexibility and bad research. First command probably not necessary,
second gives a handy overview of BCM/WiringPi/physical pin numbers and
their modes and values.

sudo apt-get update && sudo apt-get install wiringpi
gpio readall

Or use it in Python: https://pinout.xyz/pinout/wiringpi

--- SoupGate-Win32 v1.05