From: "Robert McKone" 
Subject: client 3.1 - shows 2 users logged for every 1 actually logged
Date: 1999/05/18
Message-ID: #1/1
Organization: KTK Communications Ltd. (http://www.smartt.com)
NNTP-Posting-Date: 18 May 1999 08:08:52 GMT
Newsgroups: fido.novell

I've recently upgraded client32 to client 3.1 on a couple of stations.  Now
the Monitor at the console shows that every user on client 3.1 is logged in
twice -- once as an unlicensed user (* starred), and then once again as
normal.  Disconnecting/deleting the unlicensed user has no adverse effect,
but is later relogged back in again.

I've posted this before and someone suggested that it is the workstation
manager.   I removed client 3.1 from the workstation, and then reinstalled
it using "Custom install" where I unchecked all options including the
Workstation Manager -- however, it is still doing the "2 users" thing.

As well, client 3.1 has somehow screwed up winsock on another station --
winsock is now reporting error 10055 (out of buffer space).   Something
tells me client 3.1 is not returning memory resources after every ???? and
so eventually the buffer is filled and winsock cannot dial out and connect.

If you can shed any light on the above (especially the 2 users logged in
bit) it would be greatly appreciated.

Thank you.
Rmckone@cantrav.com