-> MF>-> in my cps throughput when I have the Line feed directly connect
-> MF>-> from the Bell line terminal to the Line input socket of the USR
-> MF>-> Sportster, and the rest of my phone system is connected to the
-> MF>-> modem's Phone socket; thereby isolating all the noise signals a
-> MF>-> from the susceptible to interference modem.
->
-> MF>So what you're doing is bypassing the phone jack on the wall, and
-> MF>phone jack on the modem, and then soldering it to some part of
-> them
-> MF>modem?
->
-> No soldering Mike. Locate where the Bell entrance terminal is;
-> disconnect the in house connections from it; run a twisted pair
-> from the Bell entrance terminal to the Telco socket entrance of
-> the modem; use the existing pair to connect from the Phone socket
-> of the modem down to the house connections removed from the Bell
-> entrance terminal.
ok, so just run a twisted pair from the phone jack at the gray telco box
directly from the modem jack?
--- Platinum Xpress/386/Wildcat! v1.3
---------------